While driving into direct sunlight or under street lights at night, some drivers of 2024-2025 Equinox EV models (Fig. 7) may notice glare from the dash reflected onto the windshield.
Fig. 7
The dash valance panel has unique feature lines that may reflect on the windshield due to their reflective angles. (Fig. 8) In some cases, the glare may be distracting to the driver and passengers. Any customer concerns about the glare can be addressed with a new dash cover now available that can be installed over the top of the instrument panel.
Fig. 8
Two Cover Designs
Two dash covers have been released and are available to order. The one-piece design is for vehicles equipped with Forward Collision Alert. (Fig. 9)
Fig. 9
The two-piece design is for vehicles equipped with a Head-Up Display (HUD). (Fig. 10)
Fig. 10
Installation Tips
Before installing the dash cover, make sure the top of the instrument panel is clean. Follow the instruction sheet included with the dash cover for the complete installation procedure. Each step should be followed carefully to ensure the cover properly adheres to the valance panel.
It’s recommended to stretch the cover over the valance panel by starting at the middle of the cover and working toward the A-pillars. Use a silicone or rubber seam roller (Fig. 11) to smooth out the cover after installation by hand is completed. It is normal to see some slight bumps where the adhesive pads/Velcro fasteners are located underneath the cover.
Fig. 11
Refer to Bulletin #25-NA-069 for additional information, including part numbers.
– Thanks to Kurtis Hoezee
I have a Blazer EV with the same concern and would hope they would come out with the same fix for it.