Some fleet drivers of BrightDrop EV vans may notice proper seat belt operation is affected by the cleanliness of the belt and retractor guide. Due to the high amount of seat belt cycles that occur on a daily basis on these vehicles during commercial use, the seat belts may come in contact with dust, dirt and debris more frequently than a non-fleet customer.
The seat belt webbing and the retractor guide must be clean and free of dust, dirt and debris to maintain the proper operation of the restraint system. (Fig. 3)
Fig. 3
Cleaning the Retractor Guide
To improve the operation of a dirty seat belt, the seat belt retractor guide should be cleaned using the hook side of plastic hook and loop tape or equivalent. Lift up the seat belt to access the retractor guide on the B pillar. (Fig. 4)
Fig. 4
Gently rub the retractor guide with the plastic hook side of the tape to remove any contamination buildup. Move the seat belt to clean each side of the guide surface. (Fig. 5)
Fig. 5
After cleaning is completed, verify retraction of the seat belt has improved.
For more information, refer to Seat Belt Retractor Guide Cleaning in the appropriate Service Information.
It also will be helpful to refer customers to the following procedures to maintain optimal seat belt performance:
- Seat Belt Care in the Owner’s Manual
- Interior Care in the Owner’s Manual
– Thanks to Kayla Miller
