Some 2020-2024 XT5 and XT6 models may have the Forward Collision Alert indicator shown on the windshield at all times. (Fig. 9) The indicator may be on any time the ignition is on or when the headlights are turned on.
Fig. 9
If the Forward Collision Alert indicator is illuminated when it should not be, check the harness to the P43 Forward Collision Alert display. The harness may be pinched between the cowl and the instrument panel tie bar, which may cause the circuits to short together or to ground.
To inspect the harness, refer to the appropriate Service Information for the procedure to remove the instrument cluster hood. (Fig. 10)
Fig. 10
Next, remove the P43 Forward Collision Alert display and check the harness between the cowl and the instrument panel. (Fig. 11, #2) It may be pinched between the cowl and the large tie bar that goes across the instrument panel carrier. It may be necessary to move the sound deadening material on the cowl to see the harness clearly.
Fig. 11
Follow the harness down with a hand to help locate the direction of the harness and the area that may be pinched.
If the harness is pinched or damaged, remove components as needed to gain access to the area and make repairs as needed following the wire repair procedures in Service Information.
For additional information, refer to #PIT6106.
– Thanks to David Goodrow
