Frequent Navigation Service Has Expired Message

Frequent Navigation Service Has Expired Message

The infotainment system may display a “Navigation service has expired.” message on some 2018-2019 Regal, ATS, CTS, XTS, Terrain; 2019 CT6, XT4, Blazer, Camaro, Colorado, Equinox, Malibu, Silverado, Volt, Canyon […]

March 29, 2019
2019 Camaro ZL1 1LE with 10-Speed Automatic Transmission

2019 Camaro ZL1 1LE with 10-Speed Automatic Transmission

The 2019 Camaro ZL1 1LE (Fig. 1) now offers an available 10-speed 10L90 automatic transmission (RPO MGL). Unique calibrations were developed for the transmission as well as the Electronic Limited […]

March 21, 2019
Electronic Limited Slip Differential DIC Screens

Electronic Limited Slip Differential DIC Screens

The 2017-2019 Camaro ZL1 (Fig. 6) and Camaro SS 1LE; 2018-2019 Camaro ZL1 1LE; and 2015-2019 Corvette models equipped with the 6.2L V8 engine (RPOs LT1, LT4, LT5) feature an […]

March 21, 2019
2019 Colorado and Canyon Front Seat Design

2019 Colorado and Canyon Front Seat Design

The driver’s seat cushion on the 2019 Colorado and Canyon was redesigned to provide better entry and egress as well as improved comfort. Depending on the position of the steering […]

March 21, 2019
Setting the Timing on Gen 5 V6 and V8 Engines

Setting the Timing on Gen 5 V6 and V8 Engines

When installing a chain and gear set on the Gen 5 4.3L V6 (RPO LV1, LV3), 5.3L V8 (RPO L83) or 6.2L V8 engine (RPO L86, LT1, LT4) in some […]

March 21, 2019
DTC P0238 Set After Sensors Disconnected During Repairs

DTC P0238 Set After Sensors Disconnected During Repairs

Some 2019 XT4 models equipped with the 2.0L 4-cylinder engine (RPO LSY) may have DTC P0238 (Turbocharger Boost Sensor Circuit High Voltage) set after service repairs were performed that required […]

March 21, 2019
Clicking Sound from 9-speed Automatic Transmission After Engine Shutdown

Clicking Sound from 9-speed Automatic Transmission After Engine Shutdown

A rotational clicking sound may be heard after the engine is turned off on some 2017-2019 Cruze, Malibu; 2018-2019 Enclave, Envision, LaCrosse, Regal, Equinox, Traverse, Terrain; and 2019 XT4 and […]

March 21, 2019
New 2019 GM STC Course Catalog

New 2019 GM STC Course Catalog

The new 2019 GM Service Technical College (STC) Course Catalog (U.S.) (Fig. 16) is now available at GMSTC.com. Each year, the course catalog is updated with the current GM STC […]

March 21, 2019
GM Service Know-How

GM Service Know-How

The monthly GM Service Know-How Emerging Issues seminars provide service/technical information on current issues and GM certified repairs. The latest service topics from GM Brand Quality and Engineering covered in […]

March 21, 2019
New Techline Connect Application Brings It All Together for Technicians

New Techline Connect Application Brings It All Together for Technicians

As technicians are at the forefront of GM’s efforts to deliver the best customer service experience in the industry, new and enhanced tools and resources are always needed to help […]

February 26, 2019
2019 Service Manager Survey Going on Now

2019 Service Manager Survey Going on Now

GM and other automotive manufacturers have teamed up to co-sponsor an annual industry study of service managers across the United States and Canada to help better understand industry trends and […]

February 26, 2019
Phone Ringtone Plays Continuously after Incoming Call

Phone Ringtone Plays Continuously after Incoming Call

The ringtone on a mobile phone may sound continuously through the vehicle speakers after an incoming call on some 2018-2019 Sonic, Trax, Terrain; and 2019 Blazer, Camaro, Colorado, Equinox, Silverado […]

February 26, 2019
Do Not Swap Control Modules on Global Architecture Models

Do Not Swap Control Modules on Global Architecture Models

GM’s Global Architecture, or Global A, electrical system does not allow control modules to be swapped between vehicles. (Fig. 10) This has been true since the first Global A vehicles […]

February 26, 2019
Are You Programming or Reprogramming?

Are You Programming or Reprogramming?

What’s the difference between setting up a control module, programming and reprogramming? Each one is done at different times based on the state of the control module. Here are some […]

February 26, 2019